View A700_7699192.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 1 one world one brand one strategy one focus one team one kemet benefts ? e sr: 6m to 70m ? v oltage: 2v to 16v ? ca pacitance: 6.8f to 470f ? o perating temperature: -55c to 125c ? p olymer cathode technology ? h igh frequency capacitance retention ? n on-ignition failure mode ? 1 00% accelerated steady state aging ? 1 00% surge current tested ? v olumetric effciency ? s elf-healing mechanism ? e ia standard case sizes applications typical applications include dc/dc converters, notebook pcs, telecommunications, displays, and industrial applications. overview the kemet aluminum organic capacitor (ao-cap) is a solid state aluminum capacitor with an aluminum oxide dielectric and conductive polymer cathode. the use of the conductive polymer cathode results in very low esr and improved capacitance retention at high frequency. ao-caps may be operated at steady state voltages up to 100% of rated voltage (no derating) with equivalent or better reliability than tantalum capacitors operating at the recommended derated voltage. the A700 series ao-cap offers the same advantages as the polymer tantalum capacitors but also has the added advantages of 125c performance capability, higher ripple current handling capability and a lower esr range. packaged with multiple anodes/elements to reduce the depth that the signal must penetrate, this parallel arrangement reduces the esr further still to achieve lower esr than other types of surface mount capacitors with similar capacitance ranges. with reduced esr, the enhanced capacitance retention at higher frequencies provides the lowest total capacitance and an economical solution for power applications. kemet aluminum organic capacitor (ao-cap) A700 series polymer aluminum environmental compliance rohs compliant (6/6) according to directive 2002/95/ec spice for a detailed analysis of specifc part numbers, please visit kemet.com for a free download of kemet s spice software. the kemet spice program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and dc bias conditions. free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 2 2 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum ordering information a 700 v 476 m 006 a t e018 capacitor class series case size capacitance code (pf) capacitance tolerance voltage failure rate/ design lead material esr code packaging (c-spec) a = aluminum A700 = aluminum polymer d = 7343-31 v = 7343-20 w = 7343-15 x = 7343-43 first two digits represent signifcant fgures. third digit specifes number of zeros. m = 20% 002 = 2v 2r5 = 2.5v 004 = 4v 006 = 6.3v 008 = 8v 010 = 10v 12r = 12.5v 016 = 16v a = n/a t = 100% matte tin (sn) plated e = esr last three digits specify esr in mohms. (018 = 18mohms) blank = 7" reel 7280 = 13" reel performance characteristics item performance characteristics operating temperature -55c to 125c rated capacitance range 6.8fC470f @ 120 hz/25c capacitance tolerance m tolerance (20%) rated voltage range 2vC16v df(120hz) 6% esr (100khz) refer to part number electrical specifcation table leakage current 4v rating: 0.06cv (a) at rated voltage after 5 minutes > 4v rating: 0.04cv (a) at rated voltage after 5 minutes free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 3 3 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum qualifcation test condition characteristics endurance 125c @ rated voltage, 2000 hours c/c within 10% of initial value df initial limit dcl within 1.25 x initial limit esr within 2.0 x initial limit storage life 125c @ 0 volts, 2000 hours c/c within 10% of initial value df within initial limits dcl within 1.25 x initial limit esr within 2.0 x initial limit humidity 60c, 90% rh, 1,000 hours, rated voltage 60c, 90% rh, 500 hours, no load c/c within -5%/+30% of initial value df initial limit dcl within 5.0 x initial limit temperature stability extreme temperature exposure at a succession of continuous steps at +25oc, -55oc, +25oc, +85oc, +125oc, +25oc +2 5c -55c +85c +125c c/c i l* 15% 15% 20% df il il 1.2 x il 1.5 x il dcl il n/a 10 x il 10 x il surge voltage 125c, 1.32 x rated voltage, 33w resistance, 1000 cycles c/c within 10% of initial value df within initial limits dcl within initial limits esr within initial limits mechanical shock/vibration mil-std-202, meth. 213, cond. i, 100g peak. mil-std-202, meth. 204, cond. d, 10hz to 2000hz, 20g peak c/c within 10% of initial value df within initial limits dcl within initial limits *il = initial limit free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 4 4 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum electrical characteristics 100 1,000 10,000 100,000 1,000,000 10,000,000 A700v686m006ate018 A700d157m006ate015 A700x187m006ate010 capacitance (f) frequency (hz) 1 10 100 capacitance vs. frequency esr vs. frequency 0.01 0.1 1 10 100 100 1,000 10,000 100,000 1,000,000 10,000,000 impedance, esr (ohms) frequency (hz) 0.001 A700v686m006ate018_imp A700d157m006ate015_imp A700x187m006ate010_imp A700v686m006ate018_esr A700d157m006ate015_esr A700x187m006ate010_esr dimensions C millimeters (inches) metric will govern case size component kemet eia l* w* h* f* 0.1 (.004) s* 0.3 (.012) d 7343-31 7.3 0.3 (287 .012) 4.3 0.3 (.169 .012) 2.8 0.3 (098 .012) 2.4 (.094) 1.3 (.051) v 7343-20 7.3 0.3 (287 .012) 4.3 0.3 (.169 .012) 2.0 (.079) max 2.4 (.094) 1.3 (.051) w 7343-15 7.3 0.3 (287 .012) 4.3 0.3 (.169 .012) 1.5 (.059) max 2.4 (.094) 1.3 (.051) x 7343-43 7.3 0.3 (.287 .012) 4.3 0.3 .169 .012) 4.0 0.3 (.157 .012) 2.4 (.094) 1.3 (.051) free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 5 5 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum rated voltage rated cap case code/ case size kemet part number dc leakage df esr ripple current moisture sensitivity rated temp vdc 120hz kemet/eia (see below for part options) amps @ +20 o c 120hz mohms @ (mamps)@ 100khz refow temp (o c) f +20 o c max/5min % max +20 o c 100khz t=+20 o c@ -55oc to 125oc 260 o c 2 100 w/7343-15 A700w107m002ate009 12 6 9 5300 3 125 2 100 w/7343-15 A700w107m002ate016 12 6 16 4000 3 125 2 100 v/7343-20 A700v107m002ate018 12 6 18 3900 3 125 2 100 v/7343-20 A700v107m002ate025 12 6 25 3300 3 125 2 100 v/7343-20 A700v107m002ate028 12 6 28 3100 3 125 2 120 v/7343-20 A700v127m002ate018 14 6 18 3900 3 125 2 120 v/7343-20 A700v127m002ate025 14 6 25 3300 3 125 2 120 v/7343-20 A700v127m002ate028 14 6 28 3100 3 125 2 150 v/7343-20 A700v157m002ate009 18 6 9 5500 3 125 2 150 v/7343-20 A700v157m002ate015 18 6 15 4200 3 125 2 150 v/7343-20 A700v157m002ate018 18 6 18 3900 3 125 2 150 v/7343-20 A700v157m002ate025 18 6 25 3300 3 125 2 150 v/7343-20 A700v157m002ate028 18 6 28 3100 3 125 2 180 d/7343-31 A700d187m002ate015 22 6 15 4100 3 125 2 180 d/7343-31 A700d187m002ate018 22 6 18 3700 3 125 2 220 v/7343-20 A700v227m002ate009 26 6 9 5500 3 125 2 220 v/7343-20 A700v227m002ate015 26 6 15 4200 3 125 2 220 v/7343-20 A700v227m002ate018 26 6 18 3900 3 125 2 220 d/7343-31 A700d227m002ate009 26 6 9 5300 3 125 2 220 d/7343-31 A700d227m002ate015 26 6 15 4100 3 125 2 220 d/7343-31 A700d227m002ate018 26 6 18 3700 3 125 2 270 d/7343-31 A700d277m002ate012 32 6 12 4600 3 125 2 270 x/7343-43 A700x277m002ate010 32 6 10 4700 3 125 2 270 x/7343-43 A700x277m002ate012 32 6 12 4300 3 125 2 270 x/7343-43 A700x277m002ate015 32 6 15 3900 3 125 2 330 v/7343-20 A700v337m002ate006 40 6 6 6700 3 125 2 330 v/7343-20 A700v337m002ate009 40 6 9 5500 3 125 2 330 d/7343-31 A700d337m002ate006 40 6 6 6500 3 125 2 330 d/7343-31 A700d337m002ate007 40 6 7 6000 3 125 2 330 d/7343-31 A700d337m002ate009 40 6 9 5300 3 125 2 330 d/7343-31 A700d337m002ate012 40 6 12 4600 3 125 2 330 x/7343-43 A700x337m002ate010 40 6 10 4700 3 125 2 330 x/7343-43 A700x337m002ate015 40 6 15 3900 3 125 2 390 x/7343-43 A700x397m002ate010 47 6 10 4700 3 125 2 390 x/7343-43 A700x397m002ate015 47 6 15 3900 3 125 2 470 d/7343-31 A700d477m002ate005 56 6 5 7100 3 125 2 470 x/7343-43 A700x477m002ate007 56 6 7 5700 3 125 2 470 x/7343-43 A700x477m002ate010 56 6 10 4700 3 125 2 470 x/7343-43 A700x477m002ate015 56 6 15 3900 3 125 2 560 x/7343-43 A700x567m002ate005 67 6 5 6700 3 125 2.5 82 v/7343-20 A700v826m2r5ate018 12 6 18 3900 3 125 2.5 82 v/7343-20 A700v826m2r5ate025 12 6 25 3300 3 125 2.5 82 v/7343-20 A700v826m2r5ate028 12 6 28 3100 3 125 2.5 150 d/7343-31 A700d157m2r5ate015 23 6 15 4100 3 125 2.5 150 d/7343-31 A700d157m2r5ate018 23 6 18 3700 3 125 2.5 180 d/7343-31 A700d187m2r5ate015 27 6 15 4100 3 125 2.5 180 d/7343-31 A700d187m2r5ate018 27 6 18 3700 3 125 2.5 220 x/7343-43 A700x227m2r5ate010 33 6 10 4700 3 125 2.5 220 x/7343-43 A700x227m2r5ate015 33 6 15 3900 3 125 2.5 330 x/7343-43 A700x337m2r5ate010 50 6 10 4700 3 125 2.5 330 x/7343-43 A700x337m2r5ate015 50 6 15 3900 3 125 2.5 470 x/7343-43 A700x477m2r5ate010 71 6 10 4700 3 125 vdc f kemet/eia (see below for part options) amps @ +20 o c 120hz mohms @ (mamps)@ 100khz refow temp (o c) 120hz +20 o c max/5min % max +20 o c 100khz t=+20 o c@ -55oc to 125oc 260 o c rated voltage rated cap case code/ case size kemet part number dc leakage df esr ripple current moisture sensitivity rated temp other part number options: also available on large (13 inch) reels. add 7280 to the end of the part number. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitutions will be marked with the higher voltage rating. substitutions can include better than series. table 1 C ratings & part number reference free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 6 6 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum other part number options: also available on large (13 inch) reels. add 7280 to the end of the part number. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitutions will be marked with the higher voltage rating. substitutions can include better than series. table 1 C ratings & part number reference con't rated voltage rated cap case code/ case size kemet part number dc leakage df esr ripple current moisture sensitivity rated temp vdc 120hz kemet/eia (see below for part options) amps @ +20 o c 120hz mohms @ (mamps)@ 100khz refow temp (o c) f +20 o c max/5min % max +20 o c 100khz t=+20 o c@ -55oc to 125oc 260 o c 4 68 v/7343-20 A700v686m004ate020 16 6 20 3700 3 125 4 68 v/7343-20 A700v686m004ate028 16 6 28 3100 3 125 4 82 v/7343-20 A700v826m004ate025 20 6 25 3300 3 125 4 82 v/7343-20 A700v826m004ate028 20 6 28 3100 3 125 4 120 d/7343-31 A700d127m004ate015 29 6 15 4100 3 125 4 120 d/7343-31 A700d127m004ate018 29 6 18 3700 3 125 4 150 d/7343-31 A700d157m004ate015 36 6 15 4100 3 125 4 150 d/7343-31 A700d157m004ate018 36 6 18 3700 3 125 4 180 d/7343-31 A700d187m004ate015 43 6 15 4100 3 125 4 180 d/7343-31 A700d187m004ate018 43 6 18 3700 3 125 4 180 x/7343-43 A700x187m004ate010 43 6 10 4700 3 125 4 180 x/7343-43 A700x187m004ate015 43 6 15 3900 3 125 4 180 x/7343-43 A700x187m004ate018 43 6 18 3500 3 125 4 220 d/7343-31 A700d227m004ate009 53 6 9 5300 3 125 4 220 d/7343-31 A700d227m004ate010 53 6 10 5000 3 125 4 220 d/7343-31 A700d227m004ate015 53 6 15 4100 3 125 4 220 x/7343-43 A700x227m004ate010 53 6 10 4700 3 125 4 220 x/7343-43 A700x227m004ate015 53 6 15 3900 3 125 4 270 x/7343-43 A700x277m004ate010 65 6 10 4700 3 125 4 270 x/7343-43 A700x277m004ate015 65 6 15 3900 3 125 4 330 x/7343-43 A700x337m004ate010 79 6 10 4700 3 125 4 330 x/7343-43 A700x337m004ate015 79 6 15 3900 3 125 6.3 10 v/7343-20 A700v106m006ate055 3 6 55 2200 3 125 6.3 22 v/7343-20 A700v226m006ate028 6 6 28 3100 3 125 6.3 22 v/7343-20 A700v226m006ate045 6 6 45 2400 3 125 6.3 33 v/7343-20 A700v336m006ate018 8 6 18 3900 3 125 6.3 33 v/7343-20 A700v336m006ate025 8 6 25 3300 3 125 6.3 33 v/7343-20 A700v336m006ate028 8 6 28 3100 3 125 6.3 47 v/7343-20 A700v476m006ate018 12 6 18 3900 3 125 6.3 47 v/7343-20 A700v476m006ate025 12 6 25 3300 3 125 6.3 47 v/7343-20 A700v476m006ate028 12 6 28 3100 3 125 6.3 56 v/7343-20 A700v566m006ate018 14 6 18 3900 3 125 6.3 56 v/7343-20 A700v566m006ate025 14 6 25 3300 3 125 6.3 56 v/7343-20 A700v566m006ate028 14 6 28 3100 3 125 6.3 68 v/7343-20 A700v686m006ate018 17 6 18 3900 3 125 6.3 68 v/7343-20 A700v686m006ate025 17 6 25 3300 3 125 6.3 68 v/7343-20 A700v686m006ate028 17 6 28 3100 3 125 6.3 82 v/7343-20 A700v826m006ate018 21 6 18 3900 3 125 6.3 82 v/7343-20 A700v826m006ate025 21 6 25 3300 3 125 6.3 82 v/7343-20 A700v826m006ate028 21 6 28 3100 3 125 6.3 100 v/7343-20 A700v107m006ate015 25 6 15 4200 3 125 6.3 100 v/7343-20 A700v107m006ate018 25 6 18 3900 3 125 6.3 100 v/7343-20 A700v107m006ate025 25 6 25 3300 3 125 6.3 100 d/7343-31 A700d107m006ate015 25 6 15 4100 3 125 6.3 100 d/7343-31 A700d107m006ate018 25 6 18 3700 3 125 6.3 120 d/7343-31 A700d127m006ate012 30 6 12 4600 3 125 6.3 120 d/7343-31 A700d127m006ate015 30 6 15 4100 3 125 6.3 120 d/7343-31 A700d127m006ate018 30 6 18 3700 3 125 6.3 150 d/7343-31 A700d157m006ate010 38 6 10 5000 3 125 6.3 150 d/7343-31 A700d157m006ate012 38 6 12 4600 3 125 6.3 150 d/7343-31 A700d157m006ate015 38 6 15 4100 3 125 6.3 150 x/7343-43 A700x157m006ate010 38 6 10 4700 3 125 6.3 150 x/7343-43 A700x157m006ate012 38 6 12 4300 3 125 vdc f kemet/eia (see below for part options) amps @ +20 o c 120hz mohms @ (mamps)@ 100khz refow temp (o c) 120hz +20 o c max/5min % max +20 o c 100khz t=+20 o c@ -55oc to 125oc 260 o c rated voltage rated cap case code/ case size kemet part number dc leakage df esr ripple current moisture sensitivity rated temp free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 7 7 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum other part number options: also available on large (13 inch) reels. add 7280 to the end of the part number. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitutions will be marked with the higher voltage rating. substitutions can include better than series. table 1 C ratings & part number reference con't rated voltage rated cap case code/ case size kemet part number dc leakage df esr ripple current moisture sensitivity rated temp vdc 120hz kemet/eia (see below for part options) amps @ +20 o c 120hz mohms @ (mamps)@ 100khz refow temp (o c) f +20 o c max/5min % max +20 o c 100khz t=+20 o c@ -55oc to 125oc 260 o c 6.3 150 x/7343-43 A700x157m006ate015 38 6 15 3900 3 125 6.3 180 x/7343-43 A700x187m006ate010 45 6 10 4700 3 125 6.3 180 x/7343-43 A700x187m006ate015 45 6 15 3900 3 125 6.3 220 x/7343-43 A700x227m006ate015 55 6 15 3900 3 125 8 10 v/7343-20 A700v106m008ate055 3 6 55 2200 3 125 8 22 v/7343-20 A700v226m008ate028 7 6 28 3100 3 125 8 22 v/7343-20 A700v226m008ate045 7 6 45 2400 3 125 8 33 v/7343-20 A700v336m008ate018 11 6 18 3900 3 125 8 33 v/7343-20 A700v336m008ate025 11 6 25 3300 3 125 8 33 v/7343-20 A700v336m008ate028 11 6 28 3100 3 125 8 56 d/7343-31 A700d566m008ate015 18 6 15 4100 3 125 8 56 d/7343-31 A700d566m008ate018 18 6 18 3700 3 125 8 68 d/7343-31 A700d686m008ate015 22 6 15 4100 3 125 8 68 d/7343-31 A700d686m008ate018 22 6 18 3700 3 125 8 100 x/7343-43 A700x107m008ate010 32 6 10 4700 3 125 8 100 x/7343-43 A700x107m008ate012 32 6 12 4300 3 125 8 100 x/7343-43 A700x107m008ate015 32 6 15 3900 3 125 10 10 v/7343-20 A700v106m010ate055 4 6 55 2200 3 125 10 22 v/7343-20 A700v226m010ate028 9 6 28 3100 3 125 10 33 v/7343-20 A700v336m010ate018 13 6 18 3900 3 125 10 33 v/7343-20 A700v336m010ate025 13 6 25 3300 3 125 10 33 v/7343-20 A700v336m010ate028 13 6 28 3100 3 125 10 47 v/7343-20 A700v476m010ate028 19 6 28 3100 3 125 10 56 d/7343-31 A700d566m010ate015 22 6 15 4100 3 125 10 56 d/7343-31 A700d566m010ate018 22 6 18 3700 3 125 10 68 d/7343-31 A700d686m010ate015 27 6 15 4100 3 125 10 68 d/7343-31 A700d686m010ate018 27 6 18 3700 3 125 10 100 x/7343-43 A700x107m010ate010 40 6 10 4700 3 125 10 100 x/7343-43 A700x107m010ate015 40 6 15 3900 3 125 10 120 x/7343-43 A700x127m010ate010 48 6 10 4700 3 125 10 120 x/7343-43 A700x127m010ate015 48 6 15 3900 3 125 10 150 x/7343-43 A700x157m010ate010 60 6 10 4700 3 125 10 150 x/7343-43 A700x157m010ate015 60 6 15 3900 3 125 12.5 10 v/7343-20 A700v106m12rate040 5 6 40 2600 3 125 12.5 10 v/7343-20 A700v106m12rate060 5 6 60 2100 3 125 12.5 15 v/7343-20 A700v156m12rate040 8 6 40 2600 3 125 12.5 22 v/7343-20 A700v226m12rate030 11 6 30 3000 3 125 12.5 47 d/7343-31 A700d476m12rate020 24 6 20 3500 3 125 12.5 47 d/7343-31 A700d476m12rate025 24 6 25 3200 3 125 12.5 100 x/7343-43 A700x107m12rate015 50 6 15 3900 3 125 16 6.8 v/7343-20 A700v685m016ate070 4 6 70 2000 3 125 16 8.2 v/7343-20 A700v825m016ate045 5 6 45 2400 3 125 16 10 v/7343-20 A700v106m016ate045 6 6 45 2400 3 125 16 10 v/7343-20 A700v106m016ate060 6 6 60 2100 3 125 16 15 v/7343-20 A700v156m016ate040 10 6 40 2600 3 125 16 22 d/7343-31 A700d226m016ate018 14 6 18 3700 3 125 16 22 d/7343-31 A700d226m016ate025 14 6 25 3200 3 125 16 22 d/7343-31 A700d226m016ate030 14 6 30 2900 3 125 vdc f kemet/eia (see below for part options) amps @ +20 o c 120hz mohms @ (mamps)@ 100khz refow temp (o c) 120hz +20 o c max/5min % max +20 o c 100khz t=+20 o c@ -55oc to 125oc 260 o c rated voltage rated cap case code/ case size kemet part number dc leakage df esr ripple current moisture sensitivity rated temp free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 8 8 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum derating guidelines voltage rating max recommended steady state voltage max recommended transient voltage (1ms - 1s) -55c to 125c 2v v r 16v v r v r v r = rated voltage ripple current/ripple voltage permissible ac ripple voltage and current are related to equivalent series resistance (esr) and the power dissipation capabilities of the device. permissible ac ripple voltage which may be applied is limited by two criteria a . the positive peak ac voltage plus the dc bias voltage, if any, must not exceed the dc voltage rating of the capacitor. b . the negative peak ac voltage, in combination with bias voltage, if any, must not exceed the allowable limits specifed for r everse voltage. see the reverse voltage section for allowable limits power capability is determined based on a 20c temperature rise. a higher temperature rise and therefore higher power capability is allowable as long as the ambient temperature plus temperature rise due to ripple current does not exceed the rated temperature of the part. the maximum power dissipation by case size can be determined using the below table. case code maximum power dissipation (pmax) mwatts @ 25c w/+20c rise kemet eia A700w 7343-15 290 A700v 7343-20 270 A700d 7343-31 250 A700x 7343-43 225 using the p max of the device, the maximum allowable rms ripple current or voltage may be determined. i(max) = p max/r e(max) = p max*r i = rms ripple current (amperes) e = rms ripple voltage (volts) pmax = maximum power dissipation(watts) r = esr at specifed frequency (ohms) refer to part number listings for permittable arms limits. free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 9 9 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum reverse voltage polymer aluminum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. these devices will withstand a certain degree of transient voltage reversal for short periods as shown in the below table. please note that these parts may not be operated continuously in reverse, even within these limits. temperature permissible transient reverse voltage 25c 60% of rated voltage 55c 50% of rated voltage 85c 40% of rated voltage 125c 30% of rated voltage table 2 C land dimensions/courtyard kemet metric size code density level a: maximum (most) land protrusion (mm) density level b: median (nominal) land protrusion (mm) density level c: minimum (least) land protrusion (mm) case eia x y c v1 v2 x y c v1 v2 x y c v1 v2 d 7343-31 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 v 7343-20 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 w 7343-15 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 x1 7343-43 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 density level a: for low-density product applications. recommended for wave solder applications and provides a wider process window for refow solder processes. density level b: for products with a moderate level of component density. provides a robust solder attachment condition for refow solder processes. density level c: for high component density product applications. before adapting the minimum land pattern variations the user should perform qualifcation testing based on the conditions outlined in ipc standard 7351 (ipc-7351). 1 height of these chips may create problems in wave soldering. free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 10 10 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum time temperature t smin 25 c to peak t l t s 25 t p t smax t l t p max ramp up rate = 3 c/sec max ramp down rate = 6 c/sec soldering process kemets families of surface mount capacitors are compatible with wave (single or dual), convection, ir or vapor phase refow techniques. preheating of these components is recommended to avoid extreme thermal stress. kemet's recommended profle conditions for convection and ir refow refect the profle conditions of the ipc/j-std-020d standard for moisture sensitivity testing. the devices can safely withstand a maximum of three refow passes at these conditions. note that although the x/7343-43 case size can withstand wave soldering, the tall profle (4.3 mm maximum) dictates care in wave process development. hand soldering should be performed with care due to the diffculty in process control. if performed, care should be taken to avoid contact of the soldering iron to the molded case. the iron should be used to heat the solder pad, applying solder between the pad and the termination, until refow occurs. once refow occurred, the iron should be removed immediately. "wiping" the edges of a chip and heating the top surface is not recommended. . profle feature snpb assembly pb-free assembly preheat/soak temperature min (t smin ) 100c 150c temperature max (t smax ) 150c 200c time (t s ) from t smin to t smax ) 60C120 sec 60C120 sec ramp-up rate (t l to t p ) 3c/sec max 3c/sec max liquidous temperature (t l ) 183c 217c time above liquidous (t l ) 60C150 sec 60C150 sec peak temperature (t p ) 220c* 235c** 250c* 260c** time within 5c of max peak temperature (t p ) 20 sec max 30 sec max ramp-down rate (t p to t l ) 6c/sec max 6c/sec max time 25c to peak temperature 6 minutes max 8 minutes max note: all temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly refow. *case size d, e, p, y and x **case size a, b, c, h, i, k, m, r, s, t, u, v, w and z free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 11 11 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum capacitor marking 477 2 k 035 kemet aluminum polymer (ao) rated voltage polarity indicator picofarad code kemet id pwc* * 035 = 35 th week of 2010 storage all ao-cap series are shipped in moisture barrier bags with a desiccant and moisture indicator card. these series are classifed as msl3 (moisture sensitivity level 3). product contained within the moisture barrier bags should be stored in normal working environments with temperatures not to exceed 40c and humidity not in excess of 60% rh. free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 12 12 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum tape & reel packaging information kemets molded tantalum and aluminum chip capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with eia standard 481-1: taping of surface mount components for automatic handling. this packaging system is compatible with all tape fed automatic pick and place systems. table 3 C packaging quantity case code tape width-mm 7" reel* 13" reel* kemet eia r 2012-12 8 2,500 10,000 i 3216-10 8 3,000 12,000 s 3216-12 8 2,500 10,000 t 3528-12 8 2,500 10,000 m 3528-15 8 2,000 8,000 u 6032-15 12 1,000 5,000 l 6032-19 12 1,000 5,000 w 7343-15 12 1,000 3,000 z 7343-17 12 1,000 3,000 v 7343-20 12 1,000 3,000 a 3216-18 8 2,000 9,000 b 3528-21 8 2,000 8,000 c 6032-28 12 500 3,000 d 7343-31 12 500 2,500 y 7343-40 12 500 2,000 x 7343-43 12 500 2,000 e 7260-38 12 500 2,000 * no c-spec required for 7" reel packaging. c-7280 required for 13" reel packaging. free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 13 13 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum figure 1 C embossed (plastic) carrier tape dimensions table 4 C embossed (plastic) carrier tape dimensions metric will govern constant dimensions millimeters (inches) tape size d 0 d 1 min. note 1 e 1 p 0 p 2 r ref. note 2 s 1 min. note 3 t max. t 1 max. 8mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 1.0 (0.039) 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) 12mm 1.5 (0.059) 30 (1.181) 16mm variable dimensions millimeters (inches) tape size pitch b 1 max. note 4 e 2 min. f p 1 t 2 max w max a 0 ,b 0 & k 0 8mm single (4mm) 4.35 (0.171) 6.25 (0.246) 3.5 0.05 (0.138 0.002) 4.0 0.10 (0.157 0.004) 2.5 (0.098) 8.3 (0.327) note 5 12mm single (4mm) & double (8mm) 8.2 (0.323) 10.25 (0.404) 5.5 0.05 (0.217 0.002) 8.0 0.10 (0.315 0.004) 4.6 (0.181) 12.3 (0.484) 16mm triple (12mm) 12.1 (0.476) 14.25 (0.561) 5.5 0.05 (0.217 0.002) 8.0 0.10 (0.315 0.004) 4.6 (0.181) 16.3 (0.642) 1. the embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. dimensions of embossment location and hole location shall be applied independent of each other. 2. the tape with or without components shall pass around r without damage (see figure 5). 3. if s 1 <1.0 mm, there may not be enough area for cover tape to be properly applied (see eia document 481 paragraph 4.3 (b)). 4. b 1 dimension is a reference dimension for tape feeder clearance only. 5. the cavity def ned by a 0 , b 0 and k 0 shall surround the component with suff cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12mm tapes and 10 maximum for 16mm tapes (see figure 3). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8mm and 12mm wide tape and to 1.0mm maximum for 16mm tape (see figure 4). (e) see addendum in eia document 481 for standards relating to more precise taping requirements. po t f w cent er line s of ca vity ao bo user direction of unre elin g cover tape ko b 1 is for tape feeder reference only, including dra ft concentric abou t b o . t 2 ?d 1 ?do b 1 s 1 t 1 e 1 e 2 p 1 p 2 embossment for c avity size, see note 1 table 5 [10 pitches cumulative tolerance on tape 0.2 mm] free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 14 14 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum packaging information performance notes 1. cover tape break force: 1.0 kg minimum. 2. cover tape peel strength: the total peel strength of the cover tape from the carrier tape shall be: the direction of the pull shall be opposite the direction of the carrier tape travel. the pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. during peeling, the carrier and/or cover tape shall be pulled at a velocity of 30010 mm/minute. 3. labeling: bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. refer to eia-556 and eia-624. figure 2 C maximum component rotation ao bo t s max imum c ompon en t rota ti on t op view maxi mum co mponent rotat ion s id e view tape m ax imum width (mm) r otat io n ( t ) 8,12 20 16-200 10 tap e m aximum wid th ( mm) ro tat ion ( s ) 8,12 20 16-56 10 72-200 5 typical pocke t cente r line typical com po nent centerline figure 3 C maximum lateral movement 0.5 mm maxi mum 0.5 mm maxi mum 8mm & 12mm tape 1.0 mm maxi mum 1.0 mm maxi mum 16mm tape figure 4 C bending radius r r b en ding radius e mbo ssed carrier p unc hed ca rrier tape width peel strength 8mm 0.1 newton to 1.0 newton (10gf to 100gf) 12mm & 16mm 0.1 newton to 1.3 newton (10gf to 130gf) free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 15 15 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum figure 5 C reel dimensions table 5 C reel dimensions metric will govern constant dimensions millimeters (inches) tape size a b min c d min 8mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12mm 16mm variable dimensions millimeters (inches) tape size n min w 1 w 2 max w 3 8mm 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 14.4 (0.567) shall accommodate tape width without interference 12mm 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 18.4 (0.724) 16mm 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) 22.4 (0.882) a d (see note) full radi us, see note b (see note) access hole at slot location (? 40 mm min.) if present, tape slot in core for t ap e start: 2.5 mm min. width x 10.0 mm min. depth w 3 (includes flange distortion at outer edge) w 2 (m ea sured at hu b) w 1 (m ea sured at hu b) c (arbor hole diameter) note: drive spokes optional; if used, dimensions b and d shall apply. n free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 16 16 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum figure 6 C tape leader & trailer dimensions trailer 16 0 mm minimum, carrier t ape end start rou nd sp rock et holes el onga ted spro ck et holes ( 32 mm tape and wi de r) t op co ve r t ape top c ove r t ape p unche d carrier 8 mm & 12 mm only e mboss ed carrier components 100 mm min. leader 400 mm minimum, figure 7 C maximum camber carrier tape round sprocket holes 1 mm ma ximum , either direction straight edge 250 mm elongated sprocket holes (32 mm & wider ta pe s) free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 17 17 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america southeast lake mary, fl tel: 407-855-8886 northeast wilmington, ma tel: 978-658-1663 west chester, pa tel: 610-692-4642 central schaumburg, il tel: 847-882-3590 carmel, in tel: 317-706-6742 west milpitas, ca tel: 408-433-9950 mexico zapopan, jalisco tel: 52-33-3123-2141 europe southern europe geneva, switzerland tel: 41-22-715-0100 paris, france tel: 33-1-4646-1009 sasso marconi, italy tel: 39 - 051-939111 milan, italy tel: 39-02-57518176 rome, italy tel: 39-06-23231718 madrid, spain tel: 34-91-804-4303 central europe landsberg, germany tel: 49-8191-3350800 dortmund, germany tel: 49-2307-3619672 kwidzyn, poland tel: 48-55-279-7025 northern europe bishops stortford, united kingdom tel: 44-1279-757201 weymouth, united kingdom tel: 44-1305-830747 coatbridge, scotland tel: 44-1236-434455 f?rjestaden, sweden tel: 46-485-563934 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5829-1711 shanghai, china tel: 86-21-6447-0707 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6586-1900 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 18 18 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum other kemet resources disclaimer all product specif cations, statements, information and data (collectively, the information) are subject to change without notice. all information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute C and we specif cally disclaim C any warranty concerning suitability for a specif c customer application or use. this information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. tools resource location conf gure a part: capedge http://capacitoredge.kemet.com spice & fit software http://www.kemet.com/spice search our faqs: knowledgeedge http://www.kemet.com/keask product information resource location products http://www.kemet.com/products technical resources (including soldering techniques) http://www.kemet.com/technicalpapers rohs statement http://www.kemet.com/rohs quality documents http://www.kemet.com/qualitydocuments product request resource location sample request http://www.kemet.com/sample engineering kit request http://www.kemet.com/kits contact resource location website www.kemet.com contact us http://www.kemet.com/contact investor relations http://www.kemet.com/ir call us 1-877-mykemet twitter http://twitter.com/kemetcapacitors free datasheet http://www.datasheet-pdf.com/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2020_A700 ? 8/11/2011 19 19 kemet aluminum organic capacitor (ao-cap) C A700 series polymer aluminum free datasheet http://www.datasheet-pdf.com/

▲Up To Search▲

Price & Availability of A700

	To Download A700 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .